Open purchase for 365 days
Shipped the same day if purchased before 13.00
Stock balance: 5+
Reliable and efficient pool pumps made in Spain
Preva 50 has a maximum flow of 9 m3/h, which gives a flow of 216 m3/day with constant operation. Can filter the water in pool 8 x 4 if the pump runs around the clock.
Suitable pool size 30 - 40 m3.
The pump housing is made of glass fibre reinforced polypropylene. Large pre-filter with transparent polycarbonate cover for easy inspection. The pump is equipped with a drain plug for easy emptying of water during winter shutdown. Also suitable for saltwater pools. The pump is self-priming and can be installed up to 2.5m above the water surface.
Mechanical seal in carbon-ceramic and stainless steel, shaft in stainless steel.
Connection: internal 1½" and 50mm union coupling.
Each pump is factory-tested in Spain before delivery.
For specifications see below:
Reliable and efficient pool pumps made in Spain
| Product type: | Filter pump |
|---|---|
| Body material: | Glass fibre reinforced polypropylene |
| Sealing segment material: | Carbon ceramic and stainless steel AISI316 |
| Engine bonnet: | IP55 |
| Performance: | 0.37 kW |
| Output current: | 3.3A |
| Speed: | 2900 rpm |
| Flow: | 9 m3/h |
| Energy consumption: | 0.57 kW |
| Tension: | 230V |
| Motor bearings with lifetime lubrication: | Yes |
| Suction/outlet connection - bonding: | 50mm |
| Suction/outlet connection - thread: | 1 1/2″ inch |
| Noise level: | 70 dB |
| Self-suction: | Yes |
| Each part tested: | Yes |
| Shaft in contact with pumped water: | None |
| Turbine material: | Polypropylene with glass fibre and brass injection |
| Maximum working pressure: | 2.5 bar |
| Pre-filters: | Yes |
| For saline water up to 5 g/l (<0.5 %): | Yes |
| For saline water above 5 g/l (>0.5 %): | Yes |
| Weight | 8,4 kg |
|---|---|
| Flow | 7 m3/h |
| Effect | 0.33kW |
| Max pressure | 2,5bar |
| Max water temperature | 40°C |
| Pool size | <40m3 |
