SpaCare Alca Down
You should use SpaCare Alca Down if you want to lower the alkalinity of your bath water. High levels of alkalinity cause lime deposits and cloudy water and make it difficult to change the pH value.
Alkalinity is measured with a pool tester/test strips. Your pH value should be between 7.0-7.4 because then the water feels nice and comfortable when you bathe. Alkalinity should be between 80-120 mg/l.
- When adding new water to the spa, start by measuring the pH balance. Always try to stay in the range of 7.0 - 7.4. The alkalinity should be 80-120 mg/l. If it is too high, add SpaCare Alca Down.
- Use chlorine as a disinfectant in your spa. Cheapest and best. If you are allergic to chlorine, use Bromine.
- Do not underdose. Don't be afraid of the chlorine, be afraid of the bacteria. Always dose according to the instructions on the package.
- Make sure you take a good shower before bathing and thoroughly rinse off any soap residue on your body and swimwear.
- Feel free to use Cleaning-free spa filters which keeps the water cleaner and makes it easier to care for your spa.
- Change the water in the spa 3-4 times per year and at the same time clean the pipework with a special "pipe cleaner".
- When changing the water, it is also advisable to clean the spalocket and treat the vinyl against weather, wind and UV radiation.
A very important rule for good and clear bathing water is to shower thoroughly before bathing. An unshowered person carries 200 times more pollution than a showered person.
You need to maintain your hot tub and Spacare has a very good set of instructions, click here.
When using SpaCare products in your spa, you can add SpaCare MiniChlor or SpaChock at any time for shock chlorination and as a result you have clear and bacteria-free bathing water.