SpaCare SpaClean Spray

SpaCare SpaClean

When you have a dirty waterline, you can easily and effectively remove it using SpaCare SpaClean Spray. Spray SpaCare SpaClean spray on the dirty waterline and let it work for 5-15 minutes before wiping it off with a cloth.

Can also be used in bathrooms, on tiles and in shower cubicles.

Instructions for use

First, moisten the dirty area with water. Then shake the bottle of SpaClean Spray thoroughly before spraying the cleaner onto the dirty waterline. After this, take a sponge or a soft brush and work the dirty surface before finally rinsing with clean water. You can repeat the treatment if necessary.

Recommended values for hot tubs

You should therefore pay close attention to the dosage and also regularly check and adjust the chlorine, pH and alkali levels to the following recommended values:
Chlorine content 1,0-3,0 mg/l;
pH 7.0-7.4;
Alkalinity 80-120 mg/l.

Maintenance

You change the bathing water regularly and at the same time you clean the spa both inside and outside. For the inside, you use SpaCare Biofilm Cleaner to clean the built-in pipework. Repeat this 3-4 times a year. Remember to replace the filters after cleaning or clean them thoroughly, but it is not only the bath that needs care. Clean your spa lid with Cover Cleaner and seal the lid with SpaCare Cover Protect.

Daily maintenance 

For the daily operation of the spa, you can advantageously have double filters. This means that you can quickly switch to clean filters. When using one cartridge as a filter, thoroughly clean the other filter with Filter Cleaner. After 1-2 weeks of use as a spa filter, replace the dirty cartridge with the cleaned filter.

Maintenance procedures

You have to maintain your spa and Spacare has a very good instruction manual that you can read, if you click here.
For more information on care advice for hot tubs from kuben.se, you will find if you click here.