Spa chlorine granules
Delphin Chlorine Granules in powder form ensures that the water hygiene of your spa is good and you can swim safely. This type of chlorine, which is a stabilised chlorine (so-called di-chlorine), also results in a long-lasting hygienic effect on your bathing water.
Instructions for use
If you shock chlorinate or if you top up with fresh water after cleaning, then add 2-3 teaspoons of chlorine per 1000 litres of bathing water. However, after this type of chlorination, you must wait 5-6 hours before bathing. In addition, you should also measure the chlorine level before bathing.
Then, after each bathing session, add 1 teaspoon of Delphin Chlorine Granules per 1000 litres of water when the water circulation is running. The water massage (water jets) is set to the lowest speed and you can bathe after about 10 minutes.
You should therefore pay close attention to the dosage and also regularly check and adjust the bromine, pH and alkali levels to the recommended values:
Bromine 2,0-4,0 mg/l;
Alkalinity 80-120 mg/l.
You change the bathing water regularly and at the same time you clean the spa. You should use Delphin Spa Pipe Cleaner to clean the built-in pipe system. You do this 3-4 times a year. After cleaning, you take the opportunity to change the filters or clean them thoroughly. After this work, it is time to fill up with new bath water that you shock treat with Oxi Booster or Spa Shock.
For more spa care advice, see if you click here.