Fast deliveries
Wide range of products
Favourable prices
209,00 kr
Stock balance: 5+
To maintain the effectiveness of the filter, it needs to be cleaned regularly. Delphin Spa Filter Cleaner is sprayed onto the filter and then rinsed off. The product can also be mixed in a bucket of lukewarm water where the filter is soaked.
You should clean your filter cartridges with an effective and non-sudsing agent such as Spa Filter Cleaner. The purpose of your spa filter is to collect dirt and particles. These particles form a coating on the filter, which eventually becomes unable to clean the water. Skin, conditioner and other greasy particles need to be removed, so use the SpaCare Filter Cleaner for clear and clean bathing water.
You should clean the dirty filter cartridge at regular intervals. Remove the filter from the container and rinse off any visible dirt that you see between the lamellae. After flushing, place the filter cartridge in a container and add the Spa Filter Cleaner according to the dosage instructions on the package.
After soaking in the solution for at least 12 hours, remove the filter and rinse it thoroughly under clean water. Now you have a cleaned spa filter that is ready for use.
You should therefore pay close attention to the dosage and also regularly check and adjust the bromine, pH and alkali levels to the recommended values:
Bromine 2,0-4,0 mg/l;
pH 7.0-7.4;
Alkalinity 80-120 mg/l.
You change the bathing water regularly and at the same time you clean the spa. You should use Delphin Spa Pipe Cleaner to clean the built-in pipe system. You do this 3-4 times a year. After cleaning, you take the opportunity to change the filters or clean them thoroughly. After this work, it is time to fill up with new bath water that you shock treat with Oxi Booster or Spa Shock.
For more spa care advice, see if you click here.
| Weight | 1 kg |
|---|---|
| Make | |
| product | Cleaning |