Blue Connect measures and analyses
Blue Connect Go is an exciting new product that automatically analyses the water in your pool or spa. The product measures with high precision values such as PH, disinfection level with chlorine or bromine (ORP) and water temperature.
There is a free app for both iPhone and Android mobile phones where you can use the standard app to see the measurements on your mobile phone using Bluetooth.
If you want more out of Connect Go, you can subscribe to the Premium app which gives you more options. However, you must install the WiFi Extender before upgrading the software.
If you use salt to make natural chlorine/bromine, you need to buy:
Blue Connect Plus which also measures conductivity, the amount of salt in the bathing water.
Winter storage! When not using Blue Connect, e.g. in the pool in winter, the sensor should never be allowed to dry out. Put on the storage cap that the product came with filled with the recommended liquid according to the instructions for use.
The difference between Blue Connect Go and Plus
Sigfox is a mobile network developed in France for sensors that send data over long distances. You cannot use this system if you buy Blue Connect Go. If you have coverage by Sigfox, you do not need an internet connection. However, it is quite limited in Sweden. You can see if you might be able to use the system on this page. coverage map.
Blue Connect Go is a product from Riiot Labs.
You can click here to visit their website.
Blue Connect also consists of these products:
Measures and analyses your bathing water treated with chlorine, bromine or salt. Warranty 2 years. If you buy this product, you get the Premium app for your mobile phone at no extra cost, as well as Fit 50 to be able to install Blue Connect in the system's pipework. In addition, you have the opportunity to utilise Sigfox if you have coverage.
Mobile phone app
The standard app for iPhone and Android is free and can be found wherever apps are available. Premium is included in Blue Connect Plus but can also be purchased within the standard app if you have purchased a Connect Go. But then you must first have installed a WiFi Extender so you have a connection to your WiFi network.
The Wifi Extender is therefore needed to connect your Blue Connect to your WiFi network.
Replacement battery for Connect Go and Plus. Cannot be charged but is replaced after about one year of normal use. Tip! Blue connect updates the measurement values 2 times per day, which is sufficient. Every time you manually update the values, the battery is charged.
Sensor for Connect Go. Warranty 2 years. To be calibrated before each season.
This sensor fits the Blue Connect Plus for salt. Warranty 2 years. To be calibrated before each season
Blue Connect Go and Plus come calibrated from the factory. Before each new season, you need to recalibrate your Blue Connect to ensure that the instrument delivers the correct value.
Drilling bracket Ø 50 mm to be able to mount Blue Connect Go in the installation's pipework. Included if you have purchased Connect Plus.