Fast deliveries
Wide range of products
Favourable prices
Article number: 340301

460,00 kr

Stock balance: 5+

Buy 4 and pay only for 3

Viskan V series spa filter 2017-2019 Cleaning-free

Corresponds to Darlly: 40301, SC766 Unicel: 4CH-30 Filbur: FC-0141 Pleatco: PTL25P4 Viskan: S50, 50757.

460,00 kr

Stock balance: 5+

Stock balance: 5+

Buy 4 and pay only for 3

Köp

Cleaning-free Spa filter Sannra™ kconvertible to Viskan filter ACS S50 with part number 50757.

To see which other hot tubs this filter is suitable for, among others: Click here!

Viskan changed the filters for their hot tubs in 2019 so check that the thread size is correct!

This filter fits the Viskan with this filter container:

Filter container Viskan S50

Also available as a washable filter here.

Want to order 4 but only pay for 3! Click here.

Others have bought

Cleaning-free spa filters from Sannra™ simplify your spa life.

No cleaning - No filter chemicals - Clearer bathing water.

You never have to wash dirty filters or buy filter chemicals again. After 3 months, simply replace the filter and insert a new one. Each filter lasts about 3 months of normal bathing. So if you have two filters in your bath, you change them after about 5-6 months.

A no-clean spa filter removes particles down to 1-5 microns compared to traditional washable lamella filters that can only manage down to about 20 microns. This gives you clearer bathing water without having to use flocculants.

The filters are made of spun plastic, polypropylene. The manufacturing process can be likened to making cotton candy where thin strands are formed layer by layer. All these layers give the filter a very large "surface area" that can absorb dirt. The same type of filter is used in face masks.

Care instructions Sannra™ Cleaning-free spa filters

Filters need to be changed every three months for normal bathing. If you bathe often and frequently, the filter must be changed more often. If you use two filters, change them every 6 months, etc. If you use several filters in your bath, it is good to check whether the water to the circulation pump goes through one or all filters. If the water goes through a filter, it is good to change the location of the filters occasionally to ensure an even load on them.

Never use flocculants with these filters. The filters naturally remove small particles that cause cloudy water. Do not use oil-based fragrances that clog all types of filters.

We recommend using an old rinsed filter for 24 hours after changing the water and cleaning the pipes. There are usually small particles in the new water and residues may come out of the pipes after cleaning, which will shorten the life of the filters.

If you have very high levels of iron in the water, which are not filtered out before filling the spa, we advise against the use of cleaning-free filters. These remove particles down to 1-5 microns which means they are easily clogged by high iron levels.

Weight 0,6000 kg
Equivalent to Darlly

40301, SC766

Filter length

295

Equivalent to Pleatco

PTL25P4

Equivalent to Unicel

4CH-30

Equivalent to Filbur

FC-0141

Corresponds to Viskan

S50, 50757

Filter diameter

125

Top

handle

Bottom connection

Fine thread

Connection Ø

47 mm

Type of filter

Non-cleaning

Home delivery

YES

Corresponds to Article

4CH-30, 50757, ASC S50, PTL25P4, SC766

V series 2017-2019

Ängsö, Asperö, Björkö, Ekerö, Lindö, Vindö

Replaces:

Darlly40301, SC766
Unicel4CH-30
FilburFC-0141
PleatcoPTL25P4
WhisperingS50, 50757

Suitable for, among other things:

Even if your model is not listed, it may fit. Always check the size.

Bauhaus spa
Viskan Spa
V series 2017-2019Ängsö, Asperö, Björkö, Ekerö, Lindö, Vindö

Contact us

Sales, returns, complaints, delivery and support

(+46) (0)18 – 24 09 00
( Swedish support )
Weekdays 09:00 - 11:30
[email protected]